Products
Signia Nx BTE Series Accessories & Compatibility Guide | Japebo
If you use a Signia Nx BTE series hearing aid, choosing the right accessories and replacement parts is all about compatibility: the exact BTE (behind-the-ear) model, the ear coupling (earmold or thin tube), and the connection system used for sound delivery. This guide explains how Signia Nx BTE series accessories work, how to identify what fits your hearing aids, and what to look for before you order.
What “Signia Nx BTE series” typically includes
The Signia Nx platform includes multiple behind-the-ear styles. In practice, Nx BTE models are usually set up in one of these ways:
Traditional BTE with earmold (custom earmold + tubing)
BTE with thin tube (slim tube to a small earpiece/dome)
RITE/RIC-style variants in the Nx family (receiver-in-canal, with a receiver and dome) – these often use different parts than classic BTEs
Because “BTE” is sometimes used loosely, the most important step is confirming whether your device is a classic BTE (tube) or a RIC/RITE (receiver) style within the Nx generation.
How to confirm which accessories fit your Signia Nx BTE
Use these checks before buying spares:
1) Check the model name on your paperwork or in the app
Look at your user manual, fitting report, invoice, or the name shown in your hearing aid app (if you use one). Even within “Nx”, the exact model determines which wear parts are compatible.
2) Look at how sound gets into your ear: tube or receiver
If you see a tube running from the hearing aid to an earmold/earpiece, you’ll typically need tubes (thin tubes or standard tubing) and possibly domes (for thin-tube setups).
If you see a thin wire ending in a small speaker (receiver) sitting in the ear canal, you’re likely using a RIC/RITE setup and will need receivers, domes, and the correct wax protection system for the receiver.
3) Match the accessory connection type
Signia accessories and wear parts can look similar across generations, but attachment systems may differ. When you shop, match:
Tube type (thin tube vs standard tubing; left/right if applicable)
Dome interface (the dome must fit the tube/receiver tip)
Wax protection type (for receiver-based fittings)
Common accessory categories for Signia Nx BTE users
Depending on your exact Nx BTE configuration, these are the most common parts people replace:
Domes (if you use a thin tube or receiver)
Domes are the small silicone earpieces that sit in the ear canal. They come in different shapes and sizes (for example: open, closed, power). The right choice depends on your hearing loss and how the hearing aid was fitted.
How to choose: match the type (open/closed/power) and size you already wear. If you’re unsure, compare your current dome to product photos and measurements, or choose the same type/size you were fitted with.
Tubes (if you have a classic BTE or thin-tube setup)
If your Nx BTE uses tubing, replacing the tube can restore comfort and sound quality. Old tubes can harden, discolor, or loosen, which can cause whistling or a weak sound.
How to choose: identify whether you have a thin tube system or standard tubing connected to an earmold. For thin tubes, confirm whether they are left/right specific and which length you use.
Wax protection (most common on receiver-based fittings)
In receiver-based Nx fittings, wax protection helps prevent earwax from blocking the speaker outlet. If sound becomes weak or intermittent, changing the wax filter (and checking the dome) is often the first fix.
How to choose: match the exact wax protection system used on your current receiver. If you remove the dome, you can usually see the wax guard type in the receiver tip.
Receivers (only for RIC/RITE Nx variants)
Receivers are the small speakers that sit in the ear canal on RIC/RITE setups. They are model- and connection-specific, and they also come in different power levels and lengths.
How to choose: match your current receiver’s power level and length (often printed on the receiver or available from your hearing care professional). Ordering the wrong receiver is the most common compatibility issue.
Typical problems (and what accessory to check first)
Whistling (feedback)
Often caused by a loose dome/tube, a damaged tube, or a poor seal. Try a fresh dome or tube first, and ensure the earpiece sits correctly.
Weak or muffled sound
Most often caused by wax blockage at the earpiece. Replace the wax protection (if present) and the dome, and check that the tube is not kinked or blocked.
Intermittent sound
If changing dome/wax protection doesn’t help, a receiver cable (RIC/RITE) or tube connection may be worn. Identifying whether you have a tube-based BTE or receiver-based device is key before ordering parts.
Buying Signia Nx BTE series accessories online (what to double-check)
Before you add to cart, confirm:
Your device style: classic BTE (tube) vs RIC/RITE (receiver)
The exact dome/tube interface (what your current dome attaches to)
If relevant: receiver length and power level
Your current wax protection type
If you want the safest route, choose the same parts you are currently using (same type/size/system). That’s the fastest way to guarantee fit and maintain the sound your hearing aids were programmed for.
FAQ: Signia Nx BTE series compatibility
Are all Signia Nx BTE accessories interchangeable?
No. Compatibility depends on whether your Nx device uses tubing or a receiver, plus the specific attachment system. Always match what’s on your current hearing aids.
How do I know if I need tubes or receivers?
If sound is delivered through a tube from the hearing aid to the ear, you need tubes. If there is a thin wire to a small speaker in the ear canal, you need a receiver (and usually wax protection).
Can I change dome type (open to closed/power) on my own?
Sometimes, but it can change sound, comfort, and feedback performance. If your hearing aids were fitted with a specific dome type, sticking to that type is usually best unless your hearing care professional recommends a change.
What should I replace first if sound is weak?
Start with the earpiece: replace the dome and any wax protection. If you use tubing, check for blockage or hardening and replace the tube if needed.
What if I’m unsure which Signia Nx BTE parts fit?
Use the model name from your paperwork/app and compare your current parts to the product photos and specifications. If you can identify whether you have a tube-based BTE or a receiver-based Nx fitting, you’ve already solved most compatibility issues.