Philips HearLink BTE PP accessories & compatibility guide | Japebo
If you’re looking for Philips HearLink BTE PP accessories, you’re in the right place. This guide helps you identify which spare parts and consumables typically fit the Philips HearLink BTE PP (Behind-The-Ear, Power Plus) style, how to choose the correct option, and what to check before you order—so you avoid mismatched parts and get your hearing aid working comfortably and reliably again.
What “BTE PP” means for Philips HearLink accessories
BTE PP usually refers to a behind-the-ear power hearing aid designed for higher amplification needs. Compared with miniRITE/RIC models, a BTE PP setup most often uses:
A tube + earmould (rather than small snap-on domes)
Standard BTE maintenance parts such as cleaning items and, depending on configuration, moisture protection
Replaceable batteries (commonly size 13 for many power BTE devices—always confirm your exact battery size)
Because BTE PP fittings can vary (different tube thicknesses, mould connections, and clinic-set configurations), the safest way to buy accessories is to match the part to the exact connection type on your hearing aid and earmould.
Common Philips HearLink BTE PP accessory types (and how to choose)
1) Tubes (between hearing aid and earmould)
If your HearLink BTE PP uses an earmould, the tube is a key wear part. Replace it if it looks yellow, stiff, cracked, or if sound seems weaker than usual.
How to pick the right tube:
Connection type: check whether your earmould uses a standard tubing hook connection or another mould-specific connector.
Tube thickness: power BTE fittings often use thicker tubing than standard fittings.
Length: match your current tube length (or the cut length from your audiologist).
2) Earmoulds / earhooks (where applicable)
Many BTE PP fittings rely on an earmould made to your ear. Those are typically supplied by a hearing care professional, but you may still replace smaller parts such as the earhook (the plastic elbow on the hearing aid) if it becomes loose, discoloured, or cracked.
Tip: If your earhook feels wobbly or you notice feedback (whistling) that wasn’t there before, a worn earhook or hardened tubing can be the cause.
3) Domes (only if your BTE PP is fitted with a thin tube)
Some BTE-style fittings use a thin tube with domes instead of an earmould. If your Philips HearLink BTE PP is set up this way, you’ll need the correct dome family and size. Domes must match the tube end/adapter—if the attachment doesn’t match exactly, it won’t seal safely.
How to choose domes:
Match the attachment system (the dome must click/fit onto your tube tip).
Choose the right size (too small = feedback; too large = soreness).
Choose the type (open/vented for more natural sound; closed/power for more bass and less feedback—your fitting determines what works).
4) Wax protection and cleaning (varies by fitting)
Wax protection is more common on receivers and some tube tips. With BTE PP earmould fittings, earwax usually accumulates in the mould sound bore and tubing rather than a snap-in wax filter. Regardless of setup, regular cleaning reduces weak sound and blockages.
Good practice: if sound becomes dull or intermittent, check for moisture or wax blockage in the tube/mould before assuming the hearing aid is faulty.
5) Batteries (confirm size before ordering)
Philips HearLink BTE PP hearing aids often use replaceable zinc-air batteries. The correct size depends on your exact model and battery door. Always verify the battery code printed on your current batteries or check your manual.
Replace the battery if you notice sudden drop-outs, weak sound, or the low-battery alert.
Storage tip: keep batteries dry and at room temperature for best performance.
Compatibility checklist (avoid ordering the wrong Philips HearLink BTE PP part)
Check your exact model name: “Philips HearLink BTE PP” is the family/style—some parts differ by version.
Match what you have: compare photos of your current tube, earhook, and connection points.
Look for markings: some tubing and tips have size codes.
When in doubt: choose based on the connection type and the part you’re replacing (tube vs dome vs earhook).
Common problems and the accessory that usually fixes them
Weak or muffled sound: blocked earmould/tube, moisture in tube, or battery near end-of-life.
Whistling (feedback): dome too small, tube hardened, earhook loose, or earmould no longer sealing well.
Intermittent sound: battery contact issues, moisture, or a worn/loose connection.
Soreness or pressure: dome too large, poor fit, or ear canal irritation—consider a different size/type or talk to your clinician for mould adjustment.
Buy Philips HearLink BTE PP accessories online
On this page you’ll find accessories intended for Philips HearLink BTE PP fittings. If you’re unsure which part matches your device, start by identifying whether you have an earmould + tube setup or a thin-tube + dome setup, then match the connection and size to the part currently on your hearing aid.
FAQ – Philips HearLink BTE PP accessories
Do all Philips HearLink BTE PP models use the same tubing?
Not always. Tubing varies by thickness, length, and connection style. Match the tube to your current tube/earmould connection.
Can I use domes with a Philips HearLink BTE PP?
Only if your hearing aid is fitted with a thin tube and dome-style tip. Many BTE PP fittings use an earmould instead, which does not use standard snap-on domes.
How often should I replace the tube?
Replace it when it becomes stiff, yellow, cracked, or if you notice reduced sound. Many users replace tubing every few months, but it depends on body chemistry and maintenance routine.
My hearing aid whistles after I changed the tube—what should I check?
Check that the tube is fully seated, the earmould seals properly, and there are no gaps at the earhook. If you use domes, try a larger size or a more closed dome type as recommended for your fitting.