Bernafon Juna BTE

Bernafon Juna BTE Accessories & Compatibility Guide | Japebo

If you use a Bernafon Juna BTE hearing aid, choosing the right accessories is mainly about matching the correct connection and size (for example the type of tube or earhook, and the parts used in your earmould or thin-tube setup). This guide explains which accessory types are typically used with Bernafon Juna BTE models, how to identify what you have, and how to buy replacements with confidence.

What counts as “Bernafon Juna BTE accessories”?
“Accessories” for Bernafon Juna BTE usually means the everyday wear-and-tear parts that affect comfort, sound quality, and hygiene. Depending on how your Juna BTE is fitted, you may use some (not all) of the following:

Tubes (standard tubing for earmoulds or thin tubes for dome fittings)
Earhooks (the curved hook that connects the hearing aid to standard tubing)
Domes / eartips (if you have a thin-tube/open fit)
Wax protection / filters (often used in the earpiece end of certain thin-tube or receiver-style parts)
Cleaning tools (to keep sound pathways open and reduce moisture buildup)

The key is to buy the accessory that matches your exact fitting style, not just the hearing aid name.

Which fittings are used with Bernafon Juna BTE?
Bernafon Juna BTE hearing aids are behind-the-ear models that can be worn in different ways. Your accessory needs depend on which of these applies:

1) BTE with earmould (standard tube + earhook)
This setup uses an earhook on the hearing aid and a replaceable tube that runs into a custom earmould. If you have an earmould, you typically need:

Correct earhook type/size for your Juna BTE
Correct tubing thickness (the tube must match the earmould)
Cleaning items to prevent moisture and blockage in the tube

2) BTE with thin tube + dome (open fit)
Some Juna BTE fittings use a thin tube leading to a small eartip/dome. In that case, you may need:

A compatible thin tube (correct connector + length)
Domes in the right size and type (open/closed/power-style depending on your fitting)
Potential wax protection parts if your thin-tube tip uses them

How to choose the correct Bernafon Juna BTE accessories
Use these checks to make sure you’re ordering the right replacement parts.

Check 1: Look at the connection on the hearing aid
Do you see a plastic earhook on top of the hearing aid? Then you likely have an earmould + standard tubing setup. If instead you see a thin tube connection leading directly into a slim tube, you likely have an open-fit style.

Check 2: Identify the part you’re replacing (and match like-for-like)
Many returns happen because users switch accessory types unintentionally. Replace the same type first, then only change type if your hearing care professional has recommended it (for example moving from open to closed domes).

Check 3: Get the size right (especially domes and tubes)
Domes must fit comfortably and seal as intended. Too small can whistle (feedback) or fall out; too large can feel sore. Tubes must be the correct length so the hearing aid sits securely behind the ear without pulling.

Check 4: When in doubt, use the codes on the old part
Some tubes, domes, or wax protection systems have a part name or code on the packaging or the component itself. If you can’t find it, a clear photo of your current setup (hearing aid top + tube + eartip) is often enough to identify the right match.

Common Bernafon Juna BTE issues (and the accessory that usually fixes it)

Whistling / feedback
Often caused by a poor seal or a worn dome/tube. Try replacing the dome (open-fit) or check the <strong(tube) for hardening/cracks (earmould setup). Also ensure the dome is fully attached.

Sound is weak or muffled
Most commonly due to wax/moisture blockage in the earpiece, dome sound outlet, or tubing. Replace domes, clean vents, and consider replacing the tube if it’s discoloured or stiff.

Irritation or soreness
Domes that are too large or worn can irritate the ear canal. Switching to the correct dome size (or a softer/new dome) often helps. If you use an earmould, check that the tubing isn’t pulling and that the mould still fits properly.

When should you replace Juna BTE wear parts?
As a general rule:

Domes: replace regularly for hygiene and best fit (and immediately if torn or loose)
Thin tubes / standard tubes: replace when they harden, discolour, crack, or trap moisture
Wax protection: replace when blocked (or on the schedule recommended for your specific system)

Fresh wear parts often restore comfort and sound quality faster than troubleshooting settings.

Buy Bernafon Juna BTE accessories at Japebo
Japebo makes it easy to find compatible replacement parts for Bernafon Juna BTE. Choose the accessory type that matches your current fitting (earmould tubing + earhook or thin tube + domes), then select the correct size/variant.
If you’re unsure which part fits your Juna BTE, match the replacement to your existing component or use the information on your old packaging.

FAQ – Bernafon Juna BTE accessories

Are all Bernafon BTE accessories compatible with Juna BTE?
No. Compatibility depends on the connection type (earhook vs thin tube system) and the exact accessory standard. Always match the parts to your current setup.

How do I know if I need domes or an earmould tube?
If you have a custom earmould, you use standard tubing (and usually an earhook). If you have a small eartip in the ear canal, you likely use a thin tube + dome system.

Can I change dome type (open to closed) on my Juna BTE?
Sometimes, yes—but it can affect sound, comfort, and feedback. It’s best to follow your hearing care professional’s recommendation and keep to the same type when ordering replacements.

My tube looks yellow or stiff—does it matter?
Yes. Old tubing can trap moisture and reduce sound quality. Replacing the tube is often one of the quickest ways to restore clearer sound.